Arctic Cat Snowmobile Carbide Ski Runner

Snowmobile ski carbide runners made specifically for Arctic Cat Snowmobles.


Buy Arctic Cat Snowmobile Ski Runners, USA Shoppers    Buy Arctic Cat Snowmobile Ski Runners, USA Shoppers 
Single Runners

1/2 inch snowmobile runner dimensions     7/16 inch snowmobile runner dimensions     Ace snowmobile runner profile and dimensions.

  • New for 2015-16!!! RUA-0120 Standard Runner for 120 Class Snowmobiles.
  • New for 2015-16!!! DA6-1000 Dooly
  • The Executive runner has 8" of 60° turning carbide. It is suitable for competition and experienced riders. The carbide in this runner must be balanced with a studded track.
  • The Ace Bar has 6” and 8" of 60° turning carbide on a tall, square host bar. Works great if you ride in deep snow.
  • Trail Blazer IV runner has 6" of 60° turning carbide. Great if you are looking for overall improvement in handling to replace your OEM runner. Use with a studded or un-studded track.
  • The Extender Trail III with 4" of 60° turning carbide for trail touring. Use with a lightly studded or un-studded track
  • Hardweld and Standard bars do not have carbide inserts.

Dual Runners

Dooly Dual snowmobile runner with 7/16 inch bars.     Slim Jim Dual Snowmobile Runner

  • The Dooly has two Flat-Top runners mounted on a plate which significantly reduces darting. The 4”, 6” and 8” carbide in the runner follows the same riding recommendation guidelines as single bars.
  • The dual runner Slim Jim is built from one piece of steel. The runner portion is taller than the single runners and Dooly’s for deeper penetration for superb darting reduction and cornering control. Available with 4”, 6” and 8” carbide inserts.

If you don't find the Arctic Cat snowmobile runner you are looking for contact us. We'll do our best to help you find the Arctic Cat runner to fit your ski. Woody's - Ask the Experts

Find Arctic Cat snowmobile runner part numbers for your Arctic Cat snowmobile ski  in the Traction Application Guide at the top of the page.

Arctic Cat 9975 Carbide Runner Bolt Spacing, Overall Measurements and Part Numbers to Purchase.                     Arctic Cat Dooly & Slim Jim 9975 Carbide Runner Bolt Spacing, Overall Measurements and Part Numbers to Purchase.

This 9975 runner fits select Yamaha models also.

 

CARBIDE RUNNER DESCRIPTION PART NUMBER
4 Inches-60°Carbide-Extender Trail III EAT3-9975
6 Inches-60° Carbide-Trail Blazer IV TAT4-9975
6 Inches-60°Carbide-Square ACE AA6-9975
8 Inches-60°Carbide-Executive WAT-9975
8 Inches-60°Carbide-Square ACE AA6-9975
8 Inches-60°Carbide-Square ACE AA8-9975
Hardweld Runner-Top-Stock HSA-9975
4 Inches-Carbide-Dooly DA4-9975
6 Inches-60° Carbide-Dooly DA6-9975
8 Inches-60° Carbide-Dooly DA8-9975
4 Inches-60° Carbide-Slim Jim SA4-9975
6 Inches-60° Carbide-Slim Jim SA6-9975
8 Inches-60° Carbide-Slim Jim SA8-9975

Arctic Cat 9750 Carbide Runner Bolt Spacing, Overall Measurements and Part Numbers to Purchase.                   Arctic Cat 9750 Dooly & Slim Jim Carbide Runner Bolt Spacing, Overall Measurements and Part Numbers to Purchase.

9750 Runner      

CARBIDE RUNNER DESCRIPTION PART NUMBER
4 Inches-60°Carbide-Extender Trail III EAT3-9750
6 Inches-60° Carbide-Trail Blazer IV TAT4-9750
8 Inches-60°Carbide-Executive WAT-9750
6 Inches-60°Carbide-Square ACE AA6-9750
8 Inches-60°Carbide-Square ACE AA8-9750
Hardweld Runner-Top-Stock HSA-9750
Hardweld Runner RUA-9750
4 Inches-Carbide-Dooly DA4-9750
6 Inches-60° Carbide-Dooly DA6-9750
8 Inches-60° Carbide-Dooly DA8-9750
4 Inches-60° Carbide-Slim Jim SA4-9750
6 Inches-60° Carbide-Slim Jim SA6-9750
8 Inches-60° Carbide-Slim Jim SA8-9750

Arctic Cat 9850 Carbide Runner Bolt Spacing, Overall Measurements and Part Numbers to Purchase.

CARBIDE RUNNER DESCRIPTION PART NUMBER
4 Inches-60°Carbide-Extender Trail III EAT3-9850
6 Inches-60° Carbide-Trail Blazer IV TAT4-9850
8 Inches-60°Carbide-Executive WAT-9850
Hardweld Runner-Top-Stock HSA-9850
Dooly and Slim Jim Runners are not available for the 9850 Series.  

Arctic Cat 7050 Carbide Runner Bolt Spacing, Overall Measurements and Part Numbers to Purchase.

CARBIDE RUNNER DESCRIPTION PART NUMBER
4 Inches-60°Carbide-Extender Trail III EAT3-7050
6 Inches-60° Carbide-Trail Blazer IV TAT4-7050
8 Inches-60°Carbide-Executive WAT-7050
Hardweld Runner RUA-7050
Dooly and Slim Jim Runners are not available for the 7050 Series.  

Arctic Cat 6050 Carbide Runner Bolt Spacing, Overall Measurements and Part Numbers to Purchase.

CARBIDE RUNNER DESCRIPTION PART NUMBER
4 Inches-60°Carbide-Extender Trail III EAT3-6050
6 Inches-60° Carbide-Trail Blazer IV TAT4-6050
8 Inches-60°Carbide-Executive WAT-6050
Hardweld Runner-Top-Stock HSA-6050
Dooly and Slim Jim Runners are not available for the 6050 Series.  


Arctic Cat RUA-0120 120 Class Snowmobile Runner Wearbar

CARBIDE RUNNER DESCRIPTION PART NUMBER
Standard Wear Bar for 120 Class Snowmobiles   RUA-0120


     Arctic Cat DA6-1000 Dooly Snowmobile Runner Wearbar

CARBIDE RUNNER DESCRIPTION PART NUMBER
6 Inches-60° Carbide-Dooly   DA6-1000


Arctic Cat 0111 Carbide Runner Bolt Spacing, Overall Measurements and Part Numbers to Purchase.         Arctic Cat 0104 Carbide Runner Bolt Spacing, Overall Measurements and Part Numbers to Purchase.         Woody's Arctic Cat Snowmobile Runners  

          

CARBIDE RUNNER DESCRIPTION PART NUMBER
4 Inches-60°Carbide-Extender Trail III"" EAT3-0111
Hardweld Runner-Top-Stock HSA-0111
Hardweld Runner-Top-Stock HSA-0104
Standard Wear Bar RUA-0160
Dooly and Slim Jim Runners are not available for the 0111, 0104 and 0160 Series.  

  • The Executive runner has 8" of 60° turning carbide. It is suitable for competition and experienced riders. The carbide in this runner must be balanced with a studded track.
  • The Ace Bar has 8" of 60° turning carbide on a tall, square host bar. Works great if you ride in deep snow.
  • Trail Blazer IV runner has 6" of 60° turning carbide. Great if you are looking for overall improvement in handling to replace your OEM runner. Use with a studded or un-studded track.
  • The Extender Trail III with 4" of 60° turning carbide for trail touring. Use with a lightly studded or un-studded track
  • Hardweld and Standard bars do not have carbide inserts.
  • The Dooly has two Flat-Top runners mounted on a plate which significantly reduces darting. The carbide in the ski follows the same riding guidelines as single bars
  • The Slim Jim is built from one piece of steel. The runner portion is taller for deeper penetration for superb darting reduction and cornering control.

Like what you read? Share this with your friends and family using the icons below.