Woody's Insider Network
 
 

 

 

 
Competition Accessories

Competition Accessories


Woodys[r] Stud Hex Tool You always need to have the right tool for the job. A great new tool for installing studs because they need to be really tight and you are working in close quarters. The aluminum handle will rest in the palm of your hand so you can apply the pressure needed to keep the stud from rotating as you torque the nut. Woodys[r] new Stud Hex Tool will make installing studs easier each step of the way. Each tool comes with two hex bits. You can also buy a replacement package of two hex bits for your Stud Hex Tool.
Stud Hex Tool
NEW--Stud lengths of 1.325" and 1.450" are packaged with ALN2-4500 Big Nuts. The 1.575" and 1.740" studs are packaged with the taller ALN2-7000. The aluminum Big Nut with a nylon insert provides added support to longer length studs. It is available in two sizes. Use ALN2-7000 for studs longer than 1.450". Use ALN2-4500 for 1.175 to 1.450" stud lengths. Packaged in quantities of 24, 96 and 1000 pieces.
Big Nut
Woody's offers lock nuts for all stud threads 5/16", 7mm and 1/4" - 28. Order in quantities of 48 or 1,000.
Lock Nuts
Safety and Performance is what Woody's is all about! Install the Snow Flap Strap Kit to anchor your snow flap for added riding security. This kit will fit all makes and models of snowmobiles and contains all the fastening devices needed to install the straps.
Snow Flap Strap Kit
Perfect every time makes studding easy. The hollow drill for 7mm or 5/16" studs makes a precise opening for installing studs. No mistakes. DRIL-7MM part number is changing to DRIL-UNIV. For 7mm T-nut studs and 5/16" push-through studs use 7mm drill. DRIL-1/4 has been discontinued.
Universal Track Hole Drill
Square support plates should run parallel with the edge of the track to increase the longevity of the stud and support plate. Woody's indexing tool is a real time-saver to easily align our standard and Grand Digger[tm] square support plates with the edge of the track. Fits on a standard 3/8" drive ratchet.
Indexing Tool for Standard and Grand Digger™ Square Support Plates
The no touch concept of this unique tool provides the torque to tighten lock nuts while installing push-through studs without touching the surface of the support plate. Works ideal with colored support plates. Available in 5/16" and 7mm sizes.
Shallow Socket Tool
Excellent tool for marking stud patterns on your track. Choose your pattern, place the template over the track and mark the track in the center of the appropriate holes with a white dot. You can review the entire stud pattern on your track before drilling, eliminating stud placement errors. <BR>
Track Marker
Give your trailer some style with Team Woody's! Available in Orange only.
Team Woody's® Trailer Decals
These huge Team Woody's decals are available in several colors! They look great on the side of your trailer. Get yours today! 21 5/8" x 32 1/2"
Jumbo Team Woody's® Decals
These T-Nuts meet the requirements of the user operation a sled under extreme conditions. The standard barrels T-nuts have a 1/4"-20 or 7mm thread with a 3/4" or 1" head. The short barrel T-nuts are available in 1/4"-20 threads with a 3/4" head WHILE SUPPLIES LAST. Woody's introduced a new redesigned line of T-nuts to replace the Extreme Service Standard Barrel T-nut. Part Numbers ATD-7500 and ATD-9380
Extreme Service™ T-Nut - Standard Barrel
These T-Nuts meet the requirements of the user operation a sled under extreme conditions. The standard barrels T-nuts have a 1/4"-20 or 7mm thread with a 3/4" or 1" head. The short barrel T-nuts are available in 1/4"-20 threads with a 3/4" head. Woody's introduced a new redesigned line of T-nuts to replace the Extreme Service Short Barrel T-nut.
Extreme Service™ T-Nut - Short Barrel
The ES T-nut was developed to meet the requirements of a racer operating a sled under extreme conditions. They are hardened by a preferred heat-treating process. Available in quantities of 48 WHILE SUPPLIES LAST. Woody's introduced a new redesigned line of T-nuts to replace the Dished Extreme Service T-nut.
Dished Extreme Service™ T-Nut
The dished shaped 7/8" diameter T-nut uses Woody's proven Track Trapping Principle to gain extra track holding capability. This T-nut has a standard 7mm thread barrel. It is made of strong, lightweight steel. Use standard 6" snap-ring pliers for easy installation and removal. Available in package quantities of 48 and 1,000 WHILE SUPPLIES LAST. Woody's introduced a new redesigned line of T-nuts to replace the Dished 7/8" T-nut.
Dished 7/8" T-Nut
Reduce the time required to stud your track. Simple to use. Fits 3/8" square drives and 3/8" drills. Through-hardened for durability.
T-Nut Puller
Specifically designed high-strength star washer is required for mounting Hooker studs. They can also be used for securing regular studs or shimming.
Star Washer
Use these shim washers to fine tune desired stud height. For1/4" studs use aluminum shims. For 7mm studs use steel shims. 48 shims per package.
Shim Washer
Easy to use tool to sharpen steel studs while they are in the track. Available in 30 degree, 45 degree and 60 degree angles. (Use with steel studs only.)
Steel Stud Sharpening Tool
Race legal installation of studs and carbide runner in oval, drag and snowcross racing need precise measurements. The Spec Gauge conforms to ISR regulations. No racer should be without one.
Spec Gauge
This tool is invaluable for removing or installing standard and short barrel T-Nuts. Three pins fit the T-Nut prong slots and will hold it firmly in place. This tool snaps on any 3/8" drive ratchet.
Track Saver™ Tool--Standard and Short Barrel T-nuts
With this wheel mounted on you hand grinder; you will be able to sharpen the carbide in your runner while they are still on the ski. The 4 1/2" wheel fits most hand grinders. (Follow the hand grinder manufacturers safety instructions)
Hand Grinding Wheel
This special grade grinding wheel is designed for sharpening carbide runners and studs. The six inch wheels are available in 1/2" and 1" widths. Includes an arbor shim. (Follow the hand grinder manufacturers' safety instructions.)
Carbide Grinding Wheels
Top quality T-nuts offer additional stud support. Stand T-nuts have a 1/4"- 20 thread, .230" barrel and 3/4" head. The larger 1" head T-nuts are available in 1/4"- 20 and 7mm thread with a .230" barrel. Available in package quantities of 48 and 1,000 WHILE SUPPLIES LAST. Woody's introduced a new redesigned line of T-nuts to replace the Standard and Large 1" T-nuts.
Standard and Large 1" T-Nuts
The original short barrel T-nuts were designed for thin rubber or cleated tracks. 1/4"- 20 thread, 3/16" (.187") barrel and 3/4" head. Available in package quantities of 48 and 1,000. Original T-Nut are WHILE SUPPLIES LAST. Woody's introduced a new redesigned line of T-nuts to replace the Short Barrel T-nuts..
Short Barrel T-Nuts
Monitor your track, by determining your track deflection, wth this new product offering from Woody's. Add this tool to your regular maintenance schedule for optimum perfomance. Follow the deflection limit recommendations from the snowmobile or track manufacturer. Never guess again!
Track Tension Tool
Woody's innovation--if you need a tool for proper installation, Woody's will invent one. Use the new Triangle Digger[r] indexing tool to align the Triangle Digger[r] support plates as directed in their installation instructions.
Triangle Digger® Indexing Tool
Redesigned with stronger and thicker to allow tighter thread tolerance. The 3/4" has a 1/4-20 thread. It is sold in packages of 48.
NEW 3/4" T-NUT
Redesigned with stronger and thicker steel to allow tighter thread tolerance. This T-nut has a 15/16" head, standard barrel and is available in both 7mm and 1/4-20 threads. It is sold in packages of 48.
NEW 15/16" T-NUT
This track saver tool has three prongs to align with the holes in the 7mm, 7/8" Dished T-nut for easy installation or removal. This tool snaps on any 3/8" drive ratchet.
Track Saver™ Tool for 7/8" Dished T-nuts
Woody's individual die cut decals in a four piece pack. Each package contains two orange and two white 2" x 6" decals.
Woody's® Decals

 

 
> ABOUT US    > WARRANTY    > SITE MAP     > SEARCH    > WHERE TO BUY    > CONTACT US   > VIEW WISH LIST   > HOME
© 2010 International Engineering & Manufacturing, Inc. All rights reserved.  |  Website developed by Mindscape.