Ski-Doo Snowmobile Ski Runners

Find Ski-Doo runner part numbers for your Ski-Doo snowmobile in the Traction Application Guide at the top of the page. Scroll down the page to find Ski-Doo Runners.

Click Here For Woody's Navigator Ski Protector

Single Runners

* - For most runners.  See Note

• New for 2015-16!!! RUS-0120 Standard Runner for 120 Class Snowmobiles.
• The Executive runner has 8" of 60° turning carbide. It is suitable for competition and experienced riders. The carbide in this runner must be balanced with a studded track.
• The Ace Bar has 6” and 8" of 60° turning carbide on a tall, square host bar. Works great if you ride in deep snow.
• Trail Blazer IV runner has 6" of 60° turning carbide. Great if you are looking for overall improvement in handling to replace your OEM runner. Use with a studded or un-studded track.
• The Extender Trail III with 4" of 60° turning carbide for trail touring. Use with a lightly studded or un-studded track
• Hardweld and Standard bars do not have carbide inserts.
• *Note - The ESD3-9255 and the ESD3-9500 use 1/2" bar material swedged

Dual Runners

• The Dooly has two Flat-Top runners mounted on a plate which significantly reduces darting. The 4”, 6” and 8” carbide in the runner follows the same riding recommendation guidelines as single bars.
• The dual runner Slim Jim is built from one piece of steel. The runner portion is taller than the single runners and Dooly’s for deeper penetration for superb darting reduction and cornering control. Available with 4”, 6” and 8” carbide inserts.

If you don't find the Ski-Doo snowmobile runner you are looking for contact us. We'll do our best to help you find the Ski-Doo runner to fit your ski. Woody's - Ask the Experts

Find Ski-Doo snowmobile runner part numbers for your Ski-Doo snowmobile ski  in the Traction Application Guide at the top of the page.

  This runner fits select Polaris snowmobile skis.           

• Woody's Navigator Ski Protector is an accessory that will protect your Pilot skis from wear. While protecting your ski it will also help reduce darting. The Navigator™ works with any single Pilot runner in the market that has a host bar up to 1/2 inch. 
• The Executive runner has 8" of 60° turning carbide. It is suitable experienced riders. This runner must be balanced with a studded track.
• The Ace Bar has 8" of 60° turning carbide on a tall, square host bar. Works great if you ride in deep snow.
• Trail Blazer IV runner has 6" of 60° turning carbide. Great if you are looking for overall improvement in handling to replace your OEM runner. Use with a studded or un-studded track.
• The Extender Trail III with 4" of 60° turning carbide for trail touring. Use with a lightly studded or un-studded track
• Hardweld and Standard bars do not have carbide inserts.
• The Dooly has two Flat-Top runners mounted on a plate to reduce darting. The carbide in the runners follows the same riding guidelines as single bars
• The Slim Jim is built from one piece of steel. The runner portion is taller for deeper penetration for superb darting reduction and cornering control.