Polaris Snowmobile Ski Runners

Find Polaris snowmobile runner part numbers for your Polaris snowmobile in the Traction Application Guide at the top of the page.

Buy Polaris Snowmobile Ski Runners, USA Shoppers    Buy Polaris Snowmobile Ski Runners, Canadian Shoppers

Single Runners

1/2 inch snowmobile runner dimensions     7/16 inch snowmobile runner dimensions     Ace snowmobile runner profile and dimensions.

  • New for 2015-16!!! RUP-0120 Standard Runner for 120 Class Snowmobiles.
  • The Executive runner has 8" of 60° turning carbide. It is suitable for competition and experienced riders. The carbide in this runner must be balanced with a studded track.
  • The Ace Bar has 6” and 8" of 60° turning carbide on a tall, square host bar. Works great if you ride in deep snow.
  • Trail Blazer IV runner has 6" of 60° turning carbide. Great if you are looking for overall improvement in handling to replace your OEM runner. Use with a studded or un-studded track.
  • The Extender Trail III with 4" of 60° turning carbide for trail touring. Use with a lightly studded or un-studded track
  • Hardweld and Standard bars do not have carbide inserts.

Dual Runners

Dooly Dual snowmobile runner with 7/16 inch bars.     Slim Jim Dual Snowmobile Runner

  • The Dooly has two Flat-Top runners mounted on a plate which significantly reduces darting. The 4”, 6” and 8” carbide in the runner follows the same riding recommendation guidelines as single bars.
  • The dual runner Slim Jim is built from one piece of steel. The runner portion is taller than the single runners and Dooly’s for deeper penetration for superb darting reduction and cornering control. Available with 4”, 6” and 8” carbide inserts.

If you don't find the Polaris snowmobile runner you are looking for contact us. We'll do our best to help you find the Polaris runner to fit your ski. Woody's - Ask the Experts

Find Polaris snowmobile runner part numbers for your Polaris snowmobile ski  in the Traction Application Guide at the top of the page.


Woody's Navigator Snowmobile Ski Protector
  
Product Description Part Number
Navigator Pro Steer Ski Protector       NAVP-1300

Polaris 1225 Carbide Runner Bolt Spacing, Overall Measurements and Part Numbers to Purchase.                        Polaris 1225 Dooly & Slim Jim Carbide Runner Bolt Spacing, Overall Measurements and Part Numbers to Purchase.


                           

CARBIDE RUNNER DESCRIPTION PART NUMBER
4 Inches-60°Carbide-Extender Trail III EPI3-1225
6 Inches-60° Carbide-Trail Blazer IV TPI4-1225
8 Inches-60°Carbide-Executive WPI-1225
6 Inches-60°Carbide-Square ACE AP6-1225
8 Inches-60°Carbide-Square ACE AP8-1225
Hardweld Runner-Top-Stock HSP-1225
Hardweld Runner RUP-1225
4 Inches-Carbide-Dooly DP4-1225
6 Inches-60° Carbide-Dooly DP6-1225
8 Inches-60° Carbide-Dooly DP8-1225
4 Inches-60° Carbide-Slim Jim SP4-1225
6 Inches-60° Carbide-Slim Jim SP6-1225
8 Inches-60° Carbide-Slim Jim SP8-1225

Polaris 1300 Carbide Runner Bolt Spacing, Overall Measurements and Part Numbers to Purchase.             Polaris 1300 Dooly & Slim Jim Carbide Runner Bolt Spacing, Overall Measurements and Part Numbers to Purchase.

                           

CARBIDE RUNNER DESCRIPTION PART NUMBER
4 Inches-60°Carbide-Extender Trail III EPI3-1300
6 Inches-60° Carbide-Trail Blazer IV TPI4-1300
8 Inches-60°Carbide-Executive WPI-1300
6 Inches-60°Carbide-Square ACE AP6-1300
8 Inches-60°Carbide-Square ACE AP8-1300
Hardweld Runner-Top-Stock --
4 Inches-Carbide-Dooly DP4-1300
6 Inches-60° Carbide-Dooly DP6-1300
4 Inches-60°Carbide-Slim Jim SP4-1300
6 Inches-60° Carbide-Slim Jim SP6-1300

Polaris 9350 Carbide Runner Bolt Spacing, Overall Measurements and Part Numbers to Purchase. Supersport Blowmolded Ski           Polaris 9350 Dooly & Slim Jim Carbide Runner Bolt Spacing, Overall Measurements and Part Numbers to Purchase. Supersport Blowmolded Ski

This runner fits select Ski Doo snowmobile skis.                        

CARBIDE RUNNER DESCRIPTION PART NUMBER
4 Inches-60°Carbide-Extender Trail III ESD3-9350
6 Inches-60° Carbide-Trail Blazer IV TSD4-9350
8 Inches-60°Carbide-Executive WSD-9350
Hardweld Runner-Top-Stock HSD-9350
Hardweld Runner RUS-9350
4 Inches-Carbide-Dooly DS4-9350
6 Inches-60° Carbide-Dooly DS6-9350
8 Inches-60° Carbide-Dooly DS8-9350
4 Inches-60° Carbide-Slim Jim SS4-9350
6 Inches-60° Carbide-Slim Jim SS6-9350
8 Inches-60° Carbide-Slim Jim SS8-9350

Polaris 9125 Carbide Runner Bolt Spacing, Overall Measurements and Part Numbers to Purchase.

CARBIDE RUNNER DESCRIPTION PART NUMBER
4 Inches-60°Carbide-Extender Trail III EPI3-9125
6 Inches-60° Carbide-Trail Blazer IV TPI4-9125
8 Inches-60°Carbide-Executive WPI-9125
Dooly and Slim Jim Runners are not available for the 9125 Series.

Polaris 3180 Carbide Runner Bolt Spacing, Overall Measurements and Part Numbers to Purchase.

CARBIDE RUNNER DESCRIPTION PART NUMBER
4 Inches-60°Carbide-Extender Trail III EPI3-3180
6 Inches-60° Carbide-Trail Blazer IV TPI-3180
8 Inches-60°Carbide-Executive WPI-3180
Standard Runner RUP-3180
Hardweld Runner-Top-Stock HSP-3180
Dooly and Slim Jim Runners are not available for the 3180 Series.   

Polaris 1125 Carbide Runner Bolt Spacing, Overall Measurements and Part Numbers to Purchase.

CARBIDE RUNNER DESCRIPTION PART NUMBER
Hardweld Runner-Top-Stock HSP-1125
Standard Runner RUP-1125
4 Inches-60°Carbide-Extender Trail III EPI3-1125
6 Inches-60° Carbide-Trail Blazer IV TPI4-1125
8 Inches-60°Carbide-Executive WPI-1125
Dooly and Slim Jim Runners are not available for the 1125 Series.

Polaris RUP-0120 120 Class Snowmobile Runner Wearbar

CARBIDE RUNNER DESCRIPTION PART NUMBER
Standard Wear Bar for 120 Class Snowmobiles   RUP-0120


Polaris 7125 Carbide Runner Bolt Spacing, Overall Measurements and Part Numbers to Purchase.

CARBIDE RUNNER DESCRIPTION PART NUMBER
4 Inches-60°Carbide-Extender Trail III EPI3-7125
6 Inches-60° Carbide-Trail Blazer IV TPI4-7125
8 Inches-60°Carbide-Executive WPI-7125
Dooly and Slim Jim Runners are not available for the 7125 Series.


Woody's Polaris 0041 Series Snowmobile Runner     Polaris 0260 Carbide Runner Bolt Spacing, Overall Measurements and Part Numbers to Purchase.      

CARBIDE RUNNER DESCRIPTION PART NUMBER
Standard Wear Bar RUP-0041
Standard Wear Bar RUP-0260
Dooly and Slim Jim Runners are not available for the 0041 or 0260 Series.

 

  • The Executive runner has 8" of 60° turning carbide. It is suitable for competition and experienced riders. The carbide in this runner must be balanced with a studded track.
  • The Ace Bar has 8" of 60° turning carbide on a tall, square host bar. Works great if you ride in deep snow.|
  • Trail Blazer IV runner has 6" of 60° turning carbide. Great if you are looking for overall improvement in handling to replace your OEM runner. Use with a studded or un-studded track.
  • The Extender Trail III with 4" of 60° turning carbide for trail touring. Use with a lightly studded or un-studded track
  • Hardweld and Standard bars do not have carbide inserts.
  • The Dooly has two Flat-Top runners mounted on a plate which significantly reduces darting. The carbide in the ski follows the same riding guidelines as single bars.
  • The Slim Jim is built from one piece of steel. The runner portion is taller for deeper penetration for superb darting reduction and cornering control.

Like what you read? Share this with your friends and family using the icons below.